RGB 24V DC Neon LED Tape IP65 120LED/m 9.5W 900lm/m

This 24V DC Neon LED Strip has an IP65 rating. We supply in various cut meter lengths for your convenience it features 120 high efficiency integrated LEDs that only consume 9.5W per meter. * The coil can be cut every 5 cm, exclusively along the enabled area marked with a dot.

The bright and colorful light emitted is distributed at a beam angle of 120º. It requires a power supply to operate and can power a maximum of 10 metres using a single power supply.

The housing of the Neon Coil perfectly protects the electronics against shock and humidity thanks to its IP65 protection factor, making this type of LED lighting perfect not only for indoor but also for outdoor use. It has a lifespan of approximately 30,000 working hours. 

*For a correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.

*It is recommended that the Neon Strips are kept in ventilated places without direct exposure to the sun and that the temperature does not exceed 40ºC for a correct use.

* This Neon tape requires a 24V DC Driver, we stock a full range, please contact our sales department for compatible drivers.

We also stock a range of Profile, Clips, Connector Cables and Brackets for the Neon Tape.

Key Features

• · Beam Angle: 120º ·
• Cut Points: 5 cm
• Light Source: SMD2835
• LED Strip Installation: 10 m
• Location: Outdoor, Indoor
• Battery Operated: No
• App: N/A
• Wifi: No
• Light Colour: RGB
• Number of LEDs Per Metre: 120 led/m
• Power Per Meter: 9.5 W/m
• Hours: 60.000 hours
• Includes Sensor: No
• Solar Panel: No
  
• Electrical Insulation Class: III
• Mains connection: Transformer
  
• Dimmable: Yes
• Voltage Range: 24V DC
• Type Of Dimming: Controller
• IP Rating: IP65
  
• Ambient Working Temperature: -20 °C~+50 °C
• Fitting Material: PVC
• Dimensions: 12 mm x 6 mm x 50 m