General Directions:

1. Always maintain water balance and proper bromine levels below by using a test strip or Test Kit: Free Available Bromine: 3.0ppm to 5.0ppm, PH: 7.2-7.8, Total Alkalinity: 80-120ppm, Calcium Hardness: 150-150ppm. 
2. Remove the product from the shrink sleeve over the hot tub as some dusting may occur
3. Set the SPA FROG Conditioning Cartridge wide open to #6 by holding the bottom of the cartridge and turning the top until the #6 appears in the setting window.

Directions for using the SPA FROG Conditioning Cartridge in the SPA FROG In-Line System:

1. Open the cap of the in-line system. Push down and turn the holder counter clockwise to unlock.
2. Pull holder out and snap the SPA Frog Mineral Cartridge into the slot that is labelled 'mineral'. 
3. Use alongside the SPA FROG Bromine Cartridge - place the bromine cartridge into the slot marked 'bromine'. 
4. Replace holder, push down and lock into place. Replace Cap and run the hot tub jets for 15 minutes to release the initial dose into the water.

Directions for using the SPA FROG Conditioning Cartridge in the SPA FROG Floating System:

1. Push the SPA FROG Conditioning Cartridge into one of the openings in the green floating holder. For best results insert the SPA FROG Bromine Cartridge into the other opening.