Do I need to paint each piece separately, or can I assemble first?

Paint before final installation. raw FRP panels are easier to finish individually—you'll get more even coverage and avoid overspray on adjacent body panels. Once cured, install the finished pieces onto your vehicle.

What prep work is required before painting?

Sand the surface thoroughly to ensure adhesion. Wipe down with a tack cloth to remove dust, then apply your chosen primer and topcoat system. Proper surface prep is critical for color match and durability.

Will the side skirts interfere with my jack points?

Check your vehicle's jack point locations before installation. If the side skirts sit low enough to cover factory jacking points, verify clearance or route your jack under the reinforced chassis. Always use proper lifting equipment and refer to your service manual for safe jack placement.